Electric gate installation · Portland & Seattle
Swing, slide and custom driveway gates, built in our shop and installed with the operator, safety sensors and access control in one job. One crew from the first measurement to the first open.
Family-owned since 2003 Built in our shop OR CCB #259574 WA CC SAFEHHG757D4
Safe Haven crew on an install
Slat gate between stone columns
Cedar slat gate and matching fence
★★★★★
"Logan was quick and super informative. He went above and beyond to make sure we were good to go."
Taylor Farrell · Google review
Google rating
Serving Portland since
On-site estimate and quote
Typical install, start to finish
We match any written competitor quote
Quick answer
It depends on the gate type, width, material, slope and the access add-ons you want, so Safe Haven Gates prices every install after a free site visit. We design and install swing, sliding and dual driveway gates across Portland and Seattle, and most installs are finished within a few days once the site is ready.
What we install
Swing, sliding and dual swing driveway gates, gate operators and motors, keypads, remotes, intercoms, phone-based access, vehicle loop detectors and photo-eye safety sensors.
Service area
Portland metro, Willamette Valley and SW Washington from Portland. Seattle, Bellevue, Tacoma, Everett and the Puget Sound from Seattle.
Licensed & insured
Oregon CCB #259574. Washington CC SAFEHHG757D4. Locally owned and family owned since 2003.
Contact
Portland (503) 455-7393. Seattle (425) 470-4166. office@safehavengates.com. Emergency line answers 24/7.
Offers
5% off your first electric gate service when you book online. Free, no-obligation estimates.
Materials
Steel, aluminum, wrought iron, wood and hybrid gates, each reinforced to carry the operator without sagging.
Swing or slide?
Slope, space beside the opening and width decide it. Our techs confirm on the free site visit.
Classic look for homes with clear, level space behind the gate for the leaves to open.
Good fit if
Level driveway
Room behind the gate
Openings up to about 16 ft
Best for wide openings, sloped driveways and tight swing clearance. Runs along the fence line.
Good fit if
Driveway slopes up
Room beside the opening
Openings over 16 ft
Two synchronized leaves for larger entrances, each with its own operator.
Good fit if
Wide, level entrance
Grand, symmetrical look
Faster opening
How an install goes
Every Safe Haven install follows the same order, so the gate is balanced before a motor ever touches it.
01
We check slope, clearance, power and structure, then recommend the gate and operator. Free.
02
Posts set to the right depth in reinforced concrete, so the gate never sags.
03
The gate is hung and balanced to move freely by hand before automation goes on.
04
Operator mounted and calibrated: force limits, travel distance, photo eyes and sensors.
05
Full function and obstruction test, then we walk you through every remote and code.
Built from
Steel, aluminum, wrought iron, wood and hybrid gates. Material is chosen for weather, weight and style, and every gate is reinforced so the operator never strains.
Clean modern lines, strongest for wide slide gates.
Warm privacy on a welded steel frame.
Classic scroll and lattice designs, custom made.
Natural wood double swing for country drives.
Add to any gate
Keypads
Remote transmitters
Video intercoms
Phone-based access
Vehicle loop detectors
Photo-eye safety sensors
Solar power
Before & after
A rural driveway in our service area, before and after a Safe Haven install: footings, a custom steel swing gate, and an operator with keypad entry.
Install cost estimator
Most automatic gate installs we do land between $6,000 and $22,000. Pick a gate type to see where yours likely falls, then get an exact quote on site.
Width, material and slope move the number
Keypads, intercoms and solar add to it
We match any written competitor quote
Operators we install
LiftMaster
Chamberlain
DoorKing
Apollo
Linear · Nice
Viking
FAAC
Reviews
Also onHomeAdvisorHouzzAngiYelpFacebook
Seattle office
Portland office
Where we install
Portland covers about a 40-mile radius, the Willamette Valley and SW Washington. Seattle covers the Puget Sound. Site visits are free from both offices.
Portland office
Portland metro, Willamette Valley, SW Washington
Portland · Beaverton · Hillsboro · Tigard · Lake Oswego · Aloha · Gresham · Salem · Oregon City · Tualatin · West Linn · Wilsonville · Sherwood · Milwaukie · Happy Valley · Forest Grove · Cornelius · Canby · Woodburn · McMinnville · Troutdale · St. Helens · Vancouver · Camas
Gate installation near you
Short answer
Safe Haven Gates designs and installs automatic driveway gates across the Portland metro, the Willamette Valley, SW Washington and the Seattle area. Every install starts with a free site visit, the operator and safety sensors are included, and most jobs are finished within a few days.
Family-owned since 2003
5.0 rating on Google
OR CCB #259574
WA SAFEHHG757D4
Free on-site estimate
Price match guarantee
Oregon
Swing, slide and dual gates for homes, HOAs and businesses across the metro, from the Portland office.
Oregon
New driveway gates and operators in Beaverton and Aloha, matched to the slope and width of your drive.
Oregon
Custom gates with keypad and intercom entry on private drives and HOA entrances in Lake Oswego and West Linn.
Oregon
Home, farm and commercial gate installs in Hillsboro, Cornelius and Forest Grove.
Washington
SW Washington installs from the Portland office, including Vancouver and Camas.
Washington
The Seattle-area office installs across King County, including Renton, Kent and Auburn. Call (425) 470-4166.
Washington
Eastside gate installs for Bellevue homes, HOAs and businesses.
Washington
Pierce County gate installs in Tacoma, from the Seattle-area office.
Straight answers
Can't find yours? Call the office closest to you.
How much does automatic gate installation cost?
Cost depends on gate type, size, materials, the automation system and site conditions. A free site visit gives you an exact quote, and we match any written competitor quote.
How long does it take to install an automatic gate?
Most automatic gate installations are completed within a few days, depending on complexity and site preparation.
What type of gate is best for my driveway?
It depends on layout, space and use. Swing gates suit level drives with room behind the gate, sliding gates suit wide openings, slopes and tight clearance, and dual swing gates suit wide, symmetrical entrances.
Do you install the opener, keypad and intercom too?
Yes. Every install includes the gate operator and safety sensors, and we can add keypads, remotes, intercoms, phone-based access and vehicle loop detectors.
Can I install an automatic gate myself?
It involves electrical work, structural alignment and safety systems. Professional installation is recommended so the gate operates properly and meets safety standards.
Do I get a price before the work starts?
Yes. The free on-site estimate lays out the full cost of the gate and install before any work starts.
How often should an automatic gate be maintained?
Routine maintenance is recommended at least once a year to keep the gate safe and reliable.
Book a visit
Book online for 5% off your first electric gate service, or call the office nearest you.
Tell us about your driveway
Book online or make a two-minute phone call.
We measure and quote
A free site visit covers width, slope, power and the right gate.
Built, wired and tested
Footings, gate, operator and safety sensors, tested before we leave.
Get a free estimate
Book online, 5% offOr call
Portland (503) 455-7393 Seattle (425) 470-4166Emergency line answers 24/7.