Access & automation · Portland & Seattle
We add swing and slide gate operators to existing gates, or replace a tired one, sized to your gate's weight, length and daily use. Photo eyes, manual release and remotes are set up and tested before we leave.
OR CCB #259574 WA CC SAFEHHG757D4 Licensed & insured Safety sensors on every install
LiftMaster arm operator, tuned on site
Custom double swing, steel
Modern steel slide gate
★★★★★
"Replaced our ALEKO system with LiftMaster. It's smoother and opens wider than before."
David Sharpe · Google review
Google rating
Serving Portland since
Typical opener install
We automate sound existing gates
Safety sensors on every install
Quick answer
It depends on the gate type and weight, the operator you need, power at the gate and the access options you add, so Safe Haven Gates prices every opener after a free site visit. We install swing and slide gate operators on new and existing gates across Portland and Seattle, and most opener installs are finished in one to two days.
What we install
Swing and slide gate operators, control boards, photo-eye safety sensors, manual release, remotes, keypads, intercoms, exit loops and battery or solar backup.
Service area
Portland metro, Willamette Valley and SW Washington from Portland. Seattle, Bellevue, Tacoma, Everett and the Puget Sound from Seattle.
Licensed & insured
Oregon CCB #259574. Washington CC SAFEHHG757D4. Locally owned and family owned since 2003.
Contact
Portland (503) 455-7393. Seattle (425) 470-4166. office@safehavengates.com. Emergency line answers 24/7.
Offers
5% off your first electric gate service when you book online. Free, no-obligation estimates.
Time to replace?
The gate stalls or moves unevenly, the motor grinds, remotes stop working, the opener is undersized, or the safety features no longer respond.
Repair or replace?
Pick what your gate is doing. You get what it usually means, whether it calls for a repair or a new operator, and what we would do on the visit.
Usually a repair
What it usually means
Dead remote batteries, a lost code, or a failing receiver or control board.
Repair or replace?
Almost always a repair. Replace the opener only if the board is obsolete and parts are no longer made.
What we'd do
Test the receiver, reprogram or replace remotes, and swap the board if it has failed.
Not sure? A free site visit settles it.
Book a site visitIf a repair makes more sense than a new opener, we will tell you. See gate repair →
What we install
Pick a part to see what it does and what we set up on install.
Operators we install
LiftMaster
Chamberlain
DoorKing
Apollo
Linear · Nice
Viking
FAAC
Brown slat slide gate
Slide gate operator
Slide operator, wrought iron
Swing, slide or commercial
Swing gates get arm or pad-mounted operators matched to leaf length and hinge type. Slide gates get a rack-and-pinion operator sized to the gate's weight, which suits wide openings, slopes and tight clearance. Apartment, storage and business gates get high-cycle commercial operators built for hundreds of trips a day.
"Dean installed our gate motor and quickly resolved a follow-up issue over the phone."
Rickreall Mini-Storage · on Dean
"Replaced our ALEKO system with LiftMaster. It's smoother and opens wider than before."
David Sharpe · Google review
How an opener install goes
Every opener goes on the same way, so the gate is balanced before the motor ever moves it.
01
We check the gate's weight, length, hinges, rollers, power and clearance, then recommend the operator.
02
Hinges, rollers and frame are adjusted or reinforced so the gate swings or slides freely by hand.
03
Power, low-voltage wiring and any exit loop run in conduit, with solar where there is no power.
04
Operator, photo eyes, keypad or intercom are mounted, wired and programmed.
05
Travel limits, force and speed are set, safety is tested, and we show you the remotes and manual release.
Safety on every install
Sensors stop and reverse the gate if a car, child or pet is in the way.
Included on every opener
Travel limits, force and speed are calibrated to your gate, not left on factory defaults.
Tested before we leave
A key release lets you open the gate by hand in an emergency or a power cut.
Shown to you at handover
A backup battery keeps the gate opening during outages. Solar is an option where there's no power.
Ask on your site visit
Reviews
Also onHomeAdvisorHouzzAngiYelpFacebook
Gate opener installation near you
Short answer
Safe Haven Gates installs and replaces swing and slide gate openers across the Portland metro, including Tigard, Gresham, Aloha and Salem, plus SW Washington and the Seattle area. Every opener starts with a free site visit, photo-eye safety sensors are included, and most installs are done in one to two days.
Family-owned since 2003
5.0 rating on Google
OR CCB #259574
WA SAFEHHG757D4
Free on-site estimate
Price match guarantee
Oregon
Swing and slide operators for homes, HOAs and businesses across the metro, from the Portland office.
Oregon
Openers for existing driveway gates in Beaverton and Aloha, sized to the slope and length of your gate.
Oregon
Quiet residential operators with keypad and intercom entry in Lake Oswego and West Linn.
Oregon
Home, farm and commercial gate operators in Hillsboro, Cornelius and Forest Grove, with solar where there's no power.
Washington
SW Washington opener installs from the Portland office, including Vancouver and Camas.
Washington
The Seattle-area office installs openers across King County, including Renton, Kent and Auburn. Call (425) 470-4166.
Washington
Eastside opener installs and upgrades for Bellevue homes, HOAs and businesses.
Washington
Pierce County gate operators in Tacoma, from the Seattle-area office.
Straight answers
Can't find yours? Call the office closest to you.
How much does gate opener installation cost?
Pricing depends on gate type, motor size, site conditions, power at the gate and the access control options you add. A free on-site evaluation gives you an exact quote, and we match any written competitor quote.
How long does gate opener installation take?
Most gate opener installations are completed within one to two days, depending on how complex the system is.
Can you install a gate opener on an existing gate?
Yes. Many existing gates can be automated if they are structurally sound and properly aligned. We check hinges, rollers and the frame on the site visit and reinforce the mount if needed.
Can the gate still be opened manually?
Yes. Every gate opener system includes a manual release for emergencies or power outages, and we show you how it works at handover.
Do gate openers work during power outages?
They can. Backup power options such as battery systems can be installed to keep the gate working during an outage, and solar operators suit gates with no power nearby.
Which gate opener brands do you install?
We install LiftMaster, DoorKing, Apollo, Linear, Nice, Viking and FAAC operators, and recommend the model based on gate weight, length and how often it opens.
Do you install residential and commercial gate operators?
Yes. We install low-cycle operators for homes and high-cycle commercial operators for apartment complexes, warehouses, storage facilities and controlled-access sites.
Opener guides
Maintenance
Book a visit
Book online for 5% off your first electric gate service, or call the office nearest you.
Tell us about your gate
Book online or make a two-minute phone call.
We size the operator
A free site visit checks gate weight, length, hinges and power.
Installed and tested
Operator, photo eyes and remotes, tested with you before we leave.
Get a free estimate
Book online, 5% offOr call
Portland (503) 455-7393 Seattle (425) 470-4166Emergency line answers 24/7.